Safe-Flow BTS 50: Brightech™ Safety/Pressure Relief Valves are manufactured with high accuracy to assure the performance of the valve, protect very critical & expensive equipments from dangerously high pressure. It is knowledgeably design, manufactured & tested for Zero Defect.
Size Range: 15mm X 25mm to 250mm X 350mm
Pressure Rating: Class 150, 300, 600, 900
Cast Steel, Spring Loaded, Full Lift, Top Guided, Angle Discharge, Close Bonnet, High Capacity, Flat Seat, Stainless Steel Trims, Conventional Type, Flanged-end Safety Relief Valve.
Cast Steel, Spring Loaded, Full Lift, Top Guided, Angle Discharge, Open Bonnet, High Capacity, Flat Seat, Stainless Steel Trims, Conventional Type, Flanged-end Safety Relief Valve.
BTSC 50 B
The Balance Bellow Safety Relief Valve is a Pressure Relief Valve which incorporates statically Balance Bellow, used to minimize the effect of Back Pressure on the operational characteristic.
Hi-Flow BTSC 50 W
Hi-Flow Weight & Lever type Safety Relief Valve are flat seated, reaction type Safety valve for greater discharge capacity, shorter blow-down, operating under low pressure & high temperature condition.
Size Range: 15mm X 25mm to 50mm X 50mm
Pressure Rating: Class 150
Feature & Benefits
- Design Simplicity
Brightech™ Safety relief valve simply designed with minimum number of parts savings in inventory . All design options and the various effects of system conditions, back-pressure etc. have been checked on Brightech in-house, in accordance with API standard
Continuous design developments and being backed by deep knowledge and infrastructure, Brightech™ has created different types of models to cater to the current needs of industries
Different models are available with optional accessories, by changing only a few parts, all Brightech™ Safety Relief Valve can be converted from the standard conventional valve to bellows type , O-ring seat seal or any type of lever or cap is required, reducing the inventory cost
- Maintenance and Service
Re-engineering has reduced the number of parts, saving by minimizing spares inventory & making maintenance easier and more cost effective
- Selection of Material
All Brightech™ Safety Relief Valve castings, forgings & raw material are made from ASTM / ASME specifications. A variety of materials are offered including non ferrous for low pressure & temperature, as well as stellited seating surfaces for high pressure & temperature and Teflon® Lined with CFT/GFT trims for chemical and process industries
- Seat Leakage Integrity
Selection of nozzle and disc materials with precise lapping gives positive shutoff comply with relevant standard and prevents loss of flow media
Ensure correct valve performance under difficult back pressure conditions