Brightech™ One PC Cast Ductile Iron, Bi-directional, Quarter Turn, Full Flow Efficient, Manually Wrench Operated Taper Plug Valve.


Size Range: 25mm to 150mm

Feature & Benefits

Liner Locking
The lining is securely locked into the deep machined groove slot into the body & holes in casting plug under melting processible of FEP or PFA. This prevents liner to collapse or blow out under full vacuum/high pressure applications in conjuction with high temperature

Large Contact Area
The full circumferential sealing area is created by the interface between the taper plug & body liner. Due to the compression sealing the valve is used in either direction.(Bi-directional)

Cavityless
Cavityless design helps to prevent accumulation of material between the body liner & taper plug

Large Port Area
Ensures low pressure drop with higher flow rate

Double Sealing Arrangement
Primary seal between the taper plug & body liner. The secondary seal is reversed V lip diaphragm which is pressurized and ensures excellent stem seal

Standard Design
The Brightech™ Fully Lined Plug Valve are designed in accordance with flange dimension of ANSI B16.5 & face to face dimension of ANSI B16.10 permits these valves to replace with any standard plug valves without altering existing piping

Lining Specificationss

• Other Lining Material

  We offer other lining materials like PTFE, ETFE, ECTFE, PVDF, PP, HDPE

• Lining Thickness

  Min. 3.0mm/4.0mm overall

• Spark Test

  Body liners & all wetted parts are spark tested at 20,000 Volts